-
×
iSDT parallel charging board kr. 345,00 -
×
Hangar-9 CubCrafters Carbon Cub FX-3 100-200cc ARF 165" kr. 15.999,00
-
×
Alu-mellemstykke 47mm 0° kr. 68,00
-
×
Hangar-9 J-3 Cub 10cc ARF, 82.5" kr. 3.599,00
-
×
KAVAN PRO-Link M3x70mm 1 stk. kr. 30,00
-
×
Ahorntræ plade 1000x100x 6mm kr. 102,00
-
×
KAVAN knife with cutting mat kr. 39,00
-
×
SIESTA kr. 1.886,00
-
×
Futaba S-U300 4,1Kg 0,19s BULK kr. 159,00
-
×
Futaba S-U400 BULK 7,9Kg HV S.BUS2 kr. 275,00
-
×
GS Kugle link M2 til 2,5mm stang 10stk. kr. 88,00 -
×
HITEC servo HS-325HB kr. 366,00
-
×
Savöx SC-1258TG+ 12Kg 0,08s kr. 595,00
-
×
Glasfiber bånd 20mm 150g/m2 100meter kr. 179,00
-
×
KAVAN GO-1053MG 20kg standard servo kr. 264,00
-
×
HITEC 1-8S Multi Balance Board adapter kr. 179,00
-
×
KAVAN GO-1180MG (0.038s/60°, 30kg.cm) kr. 896,00
-
×
KAVAN GO-55MG BB 17kg standard servo kr. 179,00
iSDT parallel charging board 
Hangar-9 CubCrafters Carbon Cub FX-3 100-200cc ARF 165" 
Alu-mellemstykke 47mm 0° 
Hangar-9 J-3 Cub 10cc ARF, 82.5" 
KAVAN PRO-Link M3x70mm 1 stk. 
Ahorntræ plade 1000x100x 6mm 
KAVAN knife with cutting mat 
SIESTA 
Futaba S-U300 4,1Kg 0,19s BULK 
Futaba S-U400 BULK 7,9Kg HV S.BUS2 
GS Kugle link M2 til 2,5mm stang 10stk. 
Savöx SC-1258TG+ 12Kg 0,08s 
Glasfiber bånd 20mm 150g/m2 100meter 
KAVAN GO-1053MG 20kg standard servo 
HITEC 1-8S Multi Balance Board adapter 
KAVAN GO-1180MG (0.038s/60°, 30kg.cm) 
KAVAN GO-55MG BB 17kg standard servo 
- Titebond III Ultimate. Den minder om den hvide pva lim, men er en stærkere lim og er vandfast efter ANSI type-1 specifikationer.Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent …Bruges til at lime træ til træ.
Application Temperature:
- Above 47°F
- Open Assembly Time:
- 8-10 minutes (70°F./50%RH)
- Total Assembly Time:
- 20-25 minutes (70°F./50%RH)
- Minimum Required Spread :
- Approximately 6 mils or 250 square feet per gallon
- Required Clamping Pressure:
- Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
- Method of Application:
- Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
- Cleanup:
- Damp cloth while glue is wet. Scrape off and sand dried excess.
- Limitations:
- Titebond III Ultimate Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact our Technical Support Team at 1-800-347-4583. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
| Pakkevægt | 0,5 kg |
|---|
Vær den første til at anmelde “Titebond III Ultimate Wood Glue 237ml”
Du skal være logged in for at afgive en anmeldelse.
Relaterede varer
På fjernlager, levering 5-10 hverdage
På fjernlager, levering 5-10 hverdage
På fjernlager, levering 5-10 hverdage
På fjernlager, levering 5-10 hverdage
På fjernlager, levering 5-10 hverdage
På fjernlager, levering 5-10 hverdage
Anmeldelser
Der er endnu ikke nogle anmeldelser.