Elan-tech ADH NF epoxy 2:1 dobbelt cartridge 400ml

2-komponent epoxy specielt velegnet til kulfiber og glasfiber dele, træ, glas og keramik.

Hærder mørke gråt op. Der medfølger 1 stk blanderør. Der skal bruges doserings pistol.

This high performance adhesive is an unfilled and stable 2 component epoxy resin adhesive. The adhesive complies with RoHS (EU Directive 2002/95/EC) and RoHS Directive 2011/65/EU (RoHS 2).
Due to its thixotropic formulation thick, uneven and even vertical adhesive joints can be achieved.

• High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)
• Very high impact and peel strength
• Good thermal resistance
• Thixotropic formulation
• Low exothermic reaction and shrinkage
• Solvent free

Processing:
Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

Technical data (averages):
Processing time (25 °C): 135 minutes*
Processing time (25 °C, 40 mm, 100 ml): 15-25 minutes
Handling strength (23 °C)**: 4 hours
Viscosity: 300.000 to 550.000 MPas
Maximal gap fill: 5 mm
Colour: Dark grey
Elongation at break: 6 %
Heat resistance: 24 h / 23 °C = 60 °C; 2 h / 80 °C = 85 °C
Flexural strength: 80 MPa
Bending modulus: 2200 MPa
Tensile strength: 54 MPa
Compressive strength: 58 %

*2 mm application at 25 °C with good wetting of the surfaces to be bonded. The processing time is reduced accordingly for thicker coatings and the resulting exothermic (reaction heat).
** Curing time until a minimum tensile shear strength of 1 MPa is reached on aluminium.