Kulfiber stang 1mm 1m
kr. 11,00
CARBON fibre rods pultruded (round)
Til byggeprojekter hvor der skal spares vægt og hvor man samtidigt ønsker god styrke. Kan bruges til f.eks. ror forbindelser, vinge rør og mange andre ting til RC modelfly, biler og både.
Kulfibervolumenandel 58%
Please note:
Internal release agents are used in the pultrusion process, which migrates to the part´s surface. A pre-treatment of the adherent due to this is necessary. These have to be roughened (abrasive paper 220 grit) and cleaned very thoroughly. Epoxy resin or cyanoacrylate (superglue) is used for the bonding itself.
Pultruded carbon fibre profiles made from 3K HT carbon fibres (Torayca® T300 or equivalent) and a duroplastic matrix are drawn continuously through a die. This production method causes the fibres to be oriented unidirectionally, i.e. along the length of the pultruded form. The result is a high fibre volume fraction of 58 % with a very low air voids content.
| Pakkevægt | 0,2 kg |
|---|
Vær den første til at anmelde “Kulfiber stang 1mm 1m”
Du skal være logged in for at afgive en anmeldelse.
Anmeldelser
Der er endnu ikke nogle anmeldelser.