Mixing Sulzer MFH mixing tubes til 400ml cartridge 10stk

Passer til Elan-Tech 400ml epoxy

When the adhesive is pressed into the cartridge, the components are independently mixed so that a ready-to-use adhesive mixture is available at the tip. After exceeding the processing time, the adhesive hardens in the mixing tube. The mixing tubes are therefore disposable articles.

Technical data:
Mixer:
Inner- Ø: 10.0 mm
Outer-Ø: 14.0 mm
Material: plastic PP
Number of elements: 24
Mixing ratios: 1:1 / 2:1
Length: 283 mm
Outlet-Ø: 3 mm
Volume: 16.89 ml
Stepped top

Article number designation MFH 10-24T:
M/F/H = Mixer / F-System / Helix 1:1 and 2:1
10-24 = Mixer inner Ø 10.0 mm – Number of mixing elements 24
T = stepped tip

This static disposable helix mixing tube was developed for the Mixpac F200 ml and F400 ml cartridges with MR 1:1 and 2:1 (the ml-values depend on the manufacturer who fills the cartridges, they can vary approx. +/- 10 ml, decisive is the size and the mixing ratio). The mixer is characterized by a unique interface development between the static mixer and the cartridge. This interface has separate ports to prevent cross-contamination of resin and hardener. This mixer is mainly used for mixing epoxy resins, epoxy adhesives, silicones, polyurethanes, acrylates, and polyester resins.